Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Postpubescent member
Joined
·
36,382 Posts
To prevent grommets from being pushed out when replacing a panel, spit, though a bit crude works well in a pinch to lube the pins. It will help the pin get through the grommet with less pressure and then dry out which makes the pin hold better. I normally use a bit of water, it works as well as a dab of oil but doesn't stay on the rubber like oil will.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top