Joined
·
13,275 Posts
Welcome to the forum spence5117
That's Moly 60 Paste, not grease. There is a difference in that you will get drips leaking down with grease.
Loctite makes a moly paste that I use. Comes in a 8 oz tub with a brush applicator. It's got an 85% Moly content rather than 60%. (Honda Moly 60 comes in 3oz tube, @ 1/3 of the tube is Moly paste, rather than a full tube of paste)
Be sure and pull the driveshaft out and lube the front splines and pull the rubber boot output bellows covering the ujoint and lube the output shaft splines too.
That's Moly 60 Paste, not grease. There is a difference in that you will get drips leaking down with grease.
Loctite makes a moly paste that I use. Comes in a 8 oz tub with a brush applicator. It's got an 85% Moly content rather than 60%. (Honda Moly 60 comes in 3oz tube, @ 1/3 of the tube is Moly paste, rather than a full tube of paste)
Be sure and pull the driveshaft out and lube the front splines and pull the rubber boot output bellows covering the ujoint and lube the output shaft splines too.
