Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
Premium Member
Joined
·
1 Posts
Discussion Starter #1
imported post

Please most of all make the newer bikes run like car engines , this motor should be running about 2400 RPM's at 70MPH it will get much better fuel mileage a big complaint) and ; last even longer

add USB input to Radio

go back to Roller stem bearings

make the GPS so we can plug a computer into it, to download routes and way points

move the driver back and handlebars way to uncomfortable for a tall person

install a heavier spring on rear

redo the whole front tubes to better quality (smoother ride)

have a cheaper then CB FRS/GMRS radio option controlled by the CB controls
 

·
Administrator
Joined
·
20,585 Posts
imported post

Welcome to the Forum from Kansas!!! :waving:

I hope you find the Forum as informative and as much fun as we do!!:cooldevil:

Again, Welcome Aboard!! :action:
 

·
Premium Member
Joined
·
1,859 Posts
imported post

I'm a 1200 rider, but what the heck, Welcome to the greatest goldwing forum on the net from the great state of Texas!!!!:waving::waving::waving::waving::waving::waving::waving:
 

·
Premium Member
Joined
·
9,790 Posts
imported post

Welcome to this Great Site!

Pull up a chair and join on in!

Ride Safe, Ray


:waving:
 

·
Premium Member
Joined
·
1 Posts
imported post

hello uk goldwing gl 1800 2007 airbag sav nav i cant find the power plugs to fit a cb the 3 pins and 13 pins can anyone help:(
 

·
Premium Member
Joined
·
969 Posts
imported post

crashbump2 wrote:
hello uk goldwing gl 1800 2007 airbag sav nav i cant find the power plugs to fit a cb the 3 pins and 13 pins can anyone help:(
Welcome. A new Topic in the Technical forum wuth your question will be seen and answered quicker. This is only the feedback for Honda forum.

In the mean time have a look at this article on fitting a CB radio, it shows where the plugins are located; http://www.goldwingfacts.com/1800CBfitting.htm
 

·
Premium Member
Joined
·
4,882 Posts
imported post

larhjass wrote:
I'm a 1200 rider, but what the heck, Welcome to the greatest goldwing forum on the net from the great state of Texas!!!!:waving::waving::waving::waving::waving::waving::waving:
yeah, I thouoght we were talking about a quadracycle her:D
 

·
Premium Member
Joined
·
94 Posts
imported post

GoWing wrote:

In the mean time have a look at this article on fitting a CB radio, it shows where the plugins are located; http://www.goldwingfacts.com/1800CBfitting.htm

----------------------------------------------------------------------------------------------------------

Instructions are for pre 06, the plugs look like they areon the same locations as the 07, the instrument panel grill comes out differently, no screws to remove behind the speaker grills.



Walter
 

·
Premium Member
Joined
·
8,242 Posts
imported post

Welcome from Idaho to the best Goldwing forum on the internet:waving:

I agree, they should have a base model Wing with just the basics.
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top