no keys

imported post

Pull your helmet lock or lock off a bag and take to a good lock smith and he can cut you a key. Had to do the same thing with my 81. They charged me 10 bucks a piece to do it.



Its 4 akorn nuts that hold the bag lock on, I think there are 7mm

imported post

Thanks, I thought that would work but thought that I would ask. As for the ignition I can buy another. Dana

imported post

It should be all keyed the same i think.
Alocksmith can do it.

imported post

Unless the PO has changed some locks or the ignition, tommy is right, all the locks SHOULD be keyed the same

imported post

the ignition switch will have a number on the cylinder that the dealer can use to cut you a key. did it for my 450.

imported post

Thanks all, I have the ignition for it(I think) At least it came with it. I'll try the dealer then the lock smith. thanks

imported post

A dealer will try and sell you a 1800. Go straight to the locksmith.

imported post

Don't be afraid of a dealer. They will not hit you over the head with a baseball bat and take your wallet. You should be able to get keys from the code through them.

imported post

I had a couple of spares made for my 1500,from a dude on ebay,i gave him the, I think 3 digit code and he sent them to me for like 6 bucks a piece.

imported post

Retired locksmith in town ran the codes and went thru some of his old books. Made me keys and they worked! Thanks for all the help and ride on. Dana

imported post

:clapper::clapper::clapper:



:action:Safe Rides!!!