Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
1,334 Posts
Discussion Starter · #1 ·
imported post

Anyone have this? :stumped::stumped::stumped:

There's a popping sound in Left handlebar controls on my wing for the past few weeks.

It of course makes popping/clicky sound when the auto cancel kicks in for the signals but this happens intermittently while riding and no signals have been used for a bit..

All the controls appear to work but I am just wondering if someone else has had this happen..

Thanks in advance! :clapper:

Tom J




BTW, I've been thinking about adding one of these to the wing, should help with bottom end - mid range & top end performance!:goofygrin::goofygrin:
 

Attachments

·
Premium Member
Joined
·
224 Posts
imported post

I had this happen as well a couple of years ago. It was a bad contact inside the switch and the popping noise was the contacts starting to burn. I got the thing stripped down and cleaned and the contacts sanded and it worked great afterwards.
 

·
Postpubescent member
Joined
·
36,382 Posts
imported post

Give it a shot of WD40 in the switches, if it's not too far gone it might cure the problem.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top