Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
Joined
·
153 Posts
it is pretty rare that float levels have to be changed on the carbs...if they were running right previously (any time in the past).

a simple check might be to try to drain the carb and catch how much gas comes out.... very difficult to do with the GL1200 but see if you can make it happen. You should get about 40ml of fuel... less and you should check levels, more and you might have gotten some from the inlet line so check another bowl
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top