Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 15 of 15 Posts

·
Official "Cheeky Plonker"
Joined
·
1,230 Posts
Discussion Starter · #1 · (Edited)
Ok, so maybe no-ones interested in my old $#!T, (as good as it may be) or maybe I should have put prices in, so I'll put in prices, but all prices are up for discussion!!

Giving you guys first dibs on these '82 parts before I put them on ebay during prime late winter rebuild season.

Set of Aspencade front rotors, both 9.75mm. I'd like to get $80 for the pair.

Set of Aspencade front rotors, Left 9.71mm, Right 9.72mm. I'd like to get $75 for this pair.

Solid rear rotor, 6.10mm, still within 6mm minimum, worked good when I took it off, changed it out for a 6.80mm, no difference, it'll just last a little longer. $20 will get you out of trouble for a while.

I made all these measurements myself with a calibrated caliper. These are not! Just some guesstimate someone has thrown out there, they are accurate!! If you find that they are not. You can return them for your money back.

Instrument cluster, in great shape, complete with cowl, 85 mph, 52,777 miles, 30 day money back guarantee, worked great when I took it off the bike, replaced it for a 28K unit., I'd like to get $100, tell me what you think.

Seat, 2 very small seam separations, otherwise in great condition, good firm seat! I'd like to get $100 on this too, 10 minutes in the hands of a good seamstress would make this last another 30 years.

Set of side panels, need a paint job but no cracks and all studs in good shape. How about $40?

Front fender, Black, in good shape. Does $20 sound good?

Rear fender, complete, Burgundy, pinstriping on rear section. $20 on this too?

Speaker covers 4", original Cyclesound, in good shape. $10?

All reasonable offers considered, shipping extra, but I'll get ya'all the best deal I can, ask questions, photo's on request. PayPal only.
 

·
Still Learning
Joined
·
13,274 Posts
You didn't put any prices.
What year is the gauge cluster?
 

·
Official "Cheeky Plonker"
Joined
·
1,230 Posts
Discussion Starter · #3 ·
No, I did not! it's all "make an offer".

The instruments are off of an '82 with an 85 mph speedometer.
 

·
Official "Cheeky Plonker"
Joined
·
1,230 Posts
Discussion Starter · #4 ·
Bump due to major editing.

Check it out!
 

·
Official "Cheeky Plonker"
Joined
·
1,230 Posts
Discussion Starter · #6 ·
Oops!
 

·
Registered
Joined
·
10 Posts
Rear Rotor

If it is in good shape I'll take it (not grooved). Find out how much shipping is to 44883 (Tiffin, Oh.) and I'll pay with paypal. Thank you
 

·
Official "Cheeky Plonker"
Joined
·
1,230 Posts
Discussion Starter · #9 ·
If it is in good shape I'll take it (not grooved). Find out how much shipping is to 44883 (Tiffin, Oh.) and I'll pay with paypal. Thank you
The rotor is a useable 6.10mm, above the 6.00mm minimum but well below the 7.00mm brand new condition, that's why it is so cheap, some significant wear is inevitable, I'll get a photo of the braking surface edited to this post tomorrow, I've been off today, MLK's birthday! Wadaya mean you don't get a holiday for MLK day? :wtf::raspberry::ROFL:
 

·
Official "Cheeky Plonker"
Joined
·
1,230 Posts
Discussion Starter · #10 ·
This is the rear rotor.
 

Attachments

·
Official "Cheeky Plonker"
Joined
·
1,230 Posts
Discussion Starter · #12 ·
Ok I'll get on it and PM you soon with the price including shipping.
 

·
Official "Cheeky Plonker"
Joined
·
1,230 Posts
Discussion Starter · #13 ·
Instrument cluster and 9.75mm front rotors (as a pair) now on ebay!
 

·
Premium Member
Joined
·
15 Posts
Side covers

Whoa, it's been 3 years since I've been here! Just getting an old wing back together so I can make my return to the road.

Interested in your side panels.
 
1 - 15 of 15 Posts
Status
Not open for further replies.
Top