Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 5 of 5 Posts

· Premium Member
Joined
·
30 Posts
Discussion Starter · #1 ·
imported post

I have installed a alarm combined with a remotestarter. I have connected it so the alarm works well and with the remotestarter I can start and stop the engine. But only when the key is in on or off position. When the key is in the steeringlock position the remotestarter will crank the engine but there is no power to the ignition. All depends on I suggest that when the key is in the steeringlock position it shortens the ignition.

So what I want to know is where on the bike, exept under the steeringlock, I can find the cables, What color does the cables that shortens the ignition have.

The wiringdiagram in the Clymer handbook does not give me any help.

Anyone who can solve my problem?

Regards

Thomas / Sweden

:18blue:
 

· Premium Member
Joined
·
30 Posts
Discussion Starter · #3 ·
imported post

Yes it´s the GL1800 -01. I´m sorry that I didn´t wrote my bike model and year.

regards

Thomas / Sweden

:18blue:
 

· Premium Member
Joined
·
30 Posts
Discussion Starter · #5 ·
imported post

Hello

I live in Sweden and my speedometer is in km/hr so it must be a European version.

Regards

Thomas / Sweden

:18blue:
 

· Premium Member
Joined
·
30 Posts
Discussion Starter · #7 ·
imported post

Hello!

I has already tested it and the remotestarter works as i described above and I had not the ignitionkey present.

Regards

Thomas / Sweden

:18blue:
 

· Premium Member
Joined
·
30 Posts
Discussion Starter · #9 ·
imported post

Hello!

A chain isn´t stronger than its weakest link. The weakest link in the HSS system is thatthe HSS-systemelectrically either shortcut the ignition or just do a cut off in the ignitioncable. What I´m asking for is just that cable. If it shortcut - I will just cut off the cable and if it cut off the ignitioncable I will do a bypass.

Regards

Thomas / Sweden

:18blue:
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top