Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
Joined
·
1,304 Posts
imported post

IIRC it's a 17 or 19mm. I use an open wrench. Take the screw out and remove the knob first. It's tight but can be done without removing the fairing. Once the nut is off push on the threads and what's left sticking out and the whole headlamp assembly will come out.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top