Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 11 Posts

· Premium Member
Joined
·
1,064 Posts
imported post

The lid on 2001-2005 models requires firstly removing the painted strip that runs along the edge of the fairing. Start at the bottom and rock it loose by lifting one edge then the other.
Remove the bolt at the level of the grip heater blanking panel and remove that panel. It has tabs on the outer edge that you need to free up from the edge of the fairing. Now remove all 4 of the bolts down the edge where the painted strip was and be careful as they are not all the same size.
You will now be able to gently lift the edge of the shelter and unbolt the pocket lid.
Its a PITA to do on pre 2006 models, the 2006 and later models have the lid attached to the pocket and they come out as a unit.
 
1 - 1 of 11 Posts
Status
Not open for further replies.
Top