Reverse issues

678 Views 7 Replies 6 Participants Last post by jdjenkins, Jul 20, 2009

AlbertCo wing

Discussion Starter · Jul 17, 2009

imported post

I,m newto the site so if I make mistakes please bear with me .

When I try to put my 97 SE in reverse and pull thr lever all the way back it will not work . If I pull it part way back it will work sometimes ; but the light on the dash doesn,t come on and doesn,t seam to have much power . The small lip on the curb will stop it .

Save

Status: Not open for further replies.

1 - 8 of 8 Posts

BenMilner

· #2 · Jul 17, 2009

imported post

There is a micro switch that the lever connects to under the left side tank/shelter panel. The switch has a long thin bendable part that can be bent to make better contact when the lever is at full up position.

Save

AlbertCo wing

Discussion Starter · #3 · Jul 18, 2009

imported post

Thanks I'll give it a try .

Save

RayandTracy

· #4 · Jul 18, 2009

imported post

AlbertCo wing wrote:

Thanks I'll give it a try .

Welcome to this Great Site!

Pull up a chair and join on in!

Ride Safe, Ray

:waving:

Save

ding dong

· #5 · Jul 18, 2009

imported post

Make sure that the linkage under the right side cover is adjusted correctly.

Save

AlbertCo wing

Discussion Starter · #6 · Jul 20, 2009

imported post

The linkage seams to working properly ; also haven't tryed the micro switch yet looks like alot of plastic removal to access it .

Save

mikef

· #7 · Jul 20, 2009

imported post

dingdong wrote:

Make sure that the linkage under the right side cover is adjusted correctly.

I agree. I would start there. It may appear to be working, but if not aligned correctly, would give those type of problems. Quick easy check and free.

Save

jdjenkins

· #8 · Jul 20, 2009

imported post

starter also runs reverse cyle, if pluged up with carbon it wont work right

Save

1 - 8 of 8 Posts

Status: Not open for further replies.

Top Contributors this Month