Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
Joined
·
2,048 Posts
imported post

if you can get the cly as far down as possible you can hone it with cylinder hone and drill. pretty easy to do and i don't think your going to get all the pitting out if it's very bad.but i'm with exavid i don't think one spot is going to make it unuesable or cause it to smoke. what have you got to loose but time and a head gasket. if your afraid of it i have an engine that someone put the belts on wrong needs heads. had 38000 miles on it and it just happens to be an 84. you can have it but i'm in tn and you'd have to use your pgs on it and your carbs.:action::action:
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top