[AZgl1800]

imported post

Sea Foam is my favorite fixer upper :waving:

Like was said, if it is gummed up, a Full Can in a partial tank of gas will really do wonders. Then keep putting a full can in every fill up until it runs like it should.

Then a little bit, once in a while, just to give it a "fine tune" ya know :waving:

Oh, it works really great in the oil. Dump a full can in the oil. Don't drain any out, just add the Sea Foam. run the bike 100-300 miles and drain the oil, change the filter. Do that once a year, and the lifters will never give a minutes worth of trouble.

 

[AZgl1800]

imported post

Sea Foam specifically tells you how to mix it with the oil. It will not reduce the viscosity enough to be noticeable.

I would not rev it out high, but I drove mine to work and back everyday with Sea Foam in the oil. It never dropped the oil pressure, but it sure did clean up the oil. Actually the oil drained out was filthy black. But the replacement oil fill stayed nice and clean.