Steve Saunders Goldwing Forums banner

small water/coolant leak (1982 Goldwing)

613 Views 1 Reply 2 Participants Last post by  jackjohn
imported post

I have developed a small water/coolant leak at the water pump area. In looking at the manual it appears there is/are o-rings in the water pump housing that is most likely my problem. Can anyone tell me how difficult it is to replace it/them, and what procedure is required to do so?

Thanks

Mannycar
Status
Not open for further replies.
1 - 2 of 2 Posts
imported post

If the leak is actually coming from the pump cover then the fix will be quick and almost painless. If on the other hand the leak is coming from the weep hole, (most likely) then it is water pump time. This is about a 3 hour job it you have the tools (nothing special) and knowhow. You will need a new pump, and seal kit. Must include all gaskets and o-rings and the oil shaft seal.
1 - 2 of 2 Posts
Status
Not open for further replies.
Top