Joined
·
250 Posts
imported post
Not to mention if its too little PSI rated, it will get hot and overflow into the overflow bottle.
You should be at 13 psi or a little more for that motor.
Try checking the rear of the gauge for a loose connection/ground .
Change the temp gauge with a temporary one & see if it does it still. Can pick one up at wrecking yards.
Not to mention if its too little PSI rated, it will get hot and overflow into the overflow bottle.
You should be at 13 psi or a little more for that motor.
Try checking the rear of the gauge for a loose connection/ground .
Change the temp gauge with a temporary one & see if it does it still. Can pick one up at wrecking yards.
