Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
503 Posts
Discussion Starter #1
imported post

i am getting ready to check valves and pulled plugs 123 are gray looking and 4 is a little black looking not wet.have not checked valves yet. what do i check for.it runs allright i have felt a little miss at idle.but otherwise runs fine??
 

·
Premium Member
Joined
·
789 Posts
imported post

#4 sounds like it's running a little rich. Could be a high float or several things. Make sure you check the plugs after a good run, too much idle will make them sooty looking.
 

·
Premium Member
Joined
·
503 Posts
Discussion Starter #3
imported post

you may be right i just put in new fan thermo switch.and have been letting it idle.to see when fan kicks on.


thank you so much for your input:waving::waving:

alan
 

·
Premium Member
Joined
·
2,848 Posts
imported post

It only take a little bit of crud to foul your jets. I would throw in some chemical cleaner and give her a good run then look at them and see what you have. Might change the whole story.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top