Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 20 of 34 Posts

·
Premium Member
Joined
·
84 Posts
Discussion Starter #1
imported post

Hello.
Excuse, that I address with the help of the program - translator.
I very much should know the sizes of piston GL 1100: diameter, Compression height (KH), Total length, Pin-Ф (Bo Ф),
In Russia to ask there is nobody.
Beforehand many thanks.
 

·
Premium Member
Joined
·
2,848 Posts
imported post

Sorry but all I have is Bore and stroke.

75.0

61.4

Hopefully someone else will be able to add what you need.
 

·
Premium Member
Joined
·
84 Posts
Discussion Starter #3
imported post

Thanks!
Has learned(Has found out) the size Pin-Ф 19мм
It is necessary still Compression height..
 

·
Premium Member
Joined
·
84 Posts
Discussion Starter #5
imported post

Нatchetman Thanks!
parts manual at me is, there the sizes necessary are not present.
Has found the big manual, I Shall load.
The Internet slow, I shall ask familiar to help.


Good forum!
 

·
Guru
Joined
·
3,074 Posts
imported post

keep us posted & ask any questions you like. There are many good people here that will help you!
 

·
Premium Member
Joined
·
12,790 Posts
imported post

:waving:Hello and Welcome . Can you explain better your question of "Compression Height (KH)" I have a piston I could measure if I understood what to measure.
 

·
Premium Member
Joined
·
1,653 Posts
imported post

I would guess that 'Compression height' might refer to the 'stroke'. That is the distance that the piston moves in the cylinder on each cycle.
 

·
Administrator
Joined
·
26,562 Posts
imported post

I think he means the distance from the center of the wrist pin to the top of the piston. Probably trying to find something else that will work or make one. Parts in Russia are probably hard to get.
 

·
Premium Member
Joined
·
84 Posts
Discussion Starter #11
imported post


1=?
2=75
3=?
4=?
5=?
 

·
Premium Member
Joined
·
84 Posts
Discussion Starter #12
imported post

Spare parts are not present. I search for analogues.
Thanks for assistance.
 

·
Premium Member
Joined
·
305 Posts
imported post

Any one have one you could send him? How secure is the mail system there? You would be willing to pay for it?

I don't have or I would.
 

·
Premium Member
Joined
·
84 Posts
Discussion Starter #14
imported post

We have Internets - shops of spare parts, but it is very expensive.
1 piston + rings = $200*4 = $800.
It is my earnings for 1.5 months.
 

·
Guru
Joined
·
3,074 Posts
imported post

Tell us your whole list of what you need.

We will see what is possible to send.

Can you pay for parts or shipping if needed?
 

·
Premium Member
Joined
·
84 Posts
Discussion Starter #16
imported post

Нatchetman
Thanks for care!
To me to buy easy and more cheaply (to make) analogue of the piston in Russia.
It is awkward to me to ask to send you for me spare parts.
In Russia now too crisis, works began less.

OnaWingandaPrayer has told that can measure the piston, I have enough of it!
 

·
Premium Member
Joined
·
238 Posts
imported post

Reklama, You probably already know this: often the hardest thing about getting help is simply asking for the help. The members on this forum are willing to help in any way possible. All they need to know is WHAT they can do to help. Myself included.

Terry
 

·
Administrator
02 GL1800 w/Auto Pilot
Joined
·
60,186 Posts
imported post

Reklama,

Would you please make a list of parts you need now?

Some of us have junk boxes of parts that we keep to send out to forum members. If we knew how many pistons you need, it is possible one or more of us may have spares that could be sent to you.

I am sure also, that someone will see your drawing and now will be able to provide the dimensions you are asking for.
 

·
Premium Member
Joined
·
84 Posts
Discussion Starter #20
imported post

Thanks!
Many thanks!!

Under the truth did not expect such reception!
Owners the Gold wing in Russia as a rule snobs and on people is easier than they look with is high, the technics(technical equipment) do not repair, simple questions cannot answer..

Questions will appear shall necessarily ask!

Hardly later (in corresponding section) I shall write a history of occurrence in me of this motorcycle and I shall tell about myself (if to you interestingly)
 
1 - 20 of 34 Posts
Status
Not open for further replies.
Top