Joined
·
2,965 Posts
imported post
There was a trick used before. You get the wrench that fits on the center bolt on the cam pulley and zip tie it to the frame that way you can work freely without wrestling with the cam.
The left one should line up easily , it is the right one that wanst o turn out of place due to spring pressure
There was a trick used before. You get the wrench that fits on the center bolt on the cam pulley and zip tie it to the frame that way you can work freely without wrestling with the cam.
The left one should line up easily , it is the right one that wanst o turn out of place due to spring pressure
