go to ACE hardware store, and get a brass adapter my air hose end is 20"x20 tpi threads per inch. so get a female adapter say 1/2x20 ( your air hose end may be different. X 1/4 male end. and i ground off the threads and cone shaped the end so my (tap and die set 10mmX1.25 tpi. and the brass...
I have gotten pretty far into the project so I thought I would start a build topic on it.
The wife has wanted her own Goldwing for a while but is much too short to hold one up on her own, so we figured a trike would do the trick, I had also been looking for a new project.
Before I started...
Hi. Just about finished my latest trike and have put led's on the rear fenders.
Problem is they don't draw enough power to make the flasher unit work so my question is is where are the flasher units on a 2002 1800, is there separate ones for the hazards and how many wires go into it.