[RogerZ]

imported post

I recently purchased an 83 Goldwing GL 1100. I have had some work done on it to get it into riding condition (hadnt been on the road sinde 95). My problem is this....The turn signals on the right side work fine, but the left side signals dont work at all. Ive replaced the bulbs in the front and back, but that has not solved the problem. I have checked the fused in the front fairing but all seem to be ok. Is there anywhere else to check for fuses ?

 

[RogerZ]

imported post

Thanks for the info.....I will check there. Taylorville is in Illinois. I will let you kow what I find

 

[RogerZ]

imported post

I will check them...thanks for the tip. My bike hasnt seen the road for 10 yrs so I wouldnt be surprised if there is a little corrosion

 

[RogerZ]

imported post

I just want to thank everyone for the help...you all have been great. I checked all the wiring and it ended up being the switch itself. Now I have to figure out why my tailights arent working.

 

[RogerZ]

imported post

Alright guys.....Ive checked all the bulbs and wiring and I cant find a problem with them, but I cant get the tail lights to come on. Any suggestions?:baffled:

 

[RogerZ]

imported post

Thanks to all of you that helped. It turns out that the problem was poor contact with the fuse that runs the tail lights. The contacts probably hadnt been touched since the bike was originally purchased. After a little cleaning they now work fine. Thanks again to everyone.