Steve Saunders Goldwing Forums banner

voltage regulator for a gl 1200

963 Views 17 Replies 11 Participants Last post by  Bellboy40
I have seen several post about installing a pore boy altenator that said to install in line a regulator so you dont get battery feed back when the engine is not running. If that is correct, what kind and where would I get what I need?
Status
Not open for further replies.
1 - 1 of 18 Posts
Possible use of a 'Blocking Diode' on the BCL so the battery cannot return power through the alternator, but there is a diode pack inside to prevent that. Unless it's a safety that the designer want you to put in place.
1 - 1 of 18 Posts
Status
Not open for further replies.
Top