[MJSantos]

imported post

exavid is right, Have the same thing going on. Ended up pulling the heads a soaking with PB Blaster. One good rap on a piece of wodd and it moved cleaned up the cylinder walls and I'm confident it will be alright. Drained the oil/water out of the crankcase put a new quart and with the heads off used my speed wrench to spin it over until oil came out of the ports feeding the heads. Been doing this once a week until I get the heads lapped and reinstalled. Hopefully it will be good to go. Like the rest of the guys, still haven't figured out why the PO pulled the plugs and left them out in the first place.