Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Premium Member
Joined
·
8 Posts
Discussion Starter #1
imported post

HI IM LOOKING FOR WINDSHIELD FOR MY GL1500 1991,

WHERE CAN I BUY ONE IN THE UK FOR A GOOD PRICE AND NOT GOING TO THE DEALER.:pumpkin:

SHAUN5835.
 

·
Premium Member
Joined
·
218 Posts
imported post

Hi Shaun

I have just bought a new screen for my GL1500.It is a slipstreamer from Cyclemax and it cost $192 (near as damn £100) inc. Air Mail delivered in just under a week.

http://www.cyclemaxohio.com/inc/sdetail/6725

I was lucky and managed to avoid import duty this would have added about another £25-30,but as I had been quoted £175 at Appy's it was a no brainer as far as I was concerned.
If you don't fancy ordering from the States, a company Skidmarx do a reasonably priced screen.

http://skidmarx.co.uk/section/screens/screens_headlight_covers/honda.html

Regards Steve

 

·
Premium Member
Joined
·
21,185 Posts
imported post

If you google Cee Bailey they have an agent in the UK. I bought one from him and it was a brilliant screen, nice and thick material sturdy and excellent weather protection.

Think the name of the firm selling them is something like "woodeys emporium"??
 

·
Premium Member
Joined
·
21,185 Posts
imported post

Being a local boy to us, pretty much, I trust we cross paths at sometime in the future Shaun, always a coffee pot on here in Croydon. :):waving:

By the way, here is a link to the supplier of Cee Bailey screens, he was most helpful when I ordered mine.

http://www.woodysimportarium.com/main.php?group=gtr1400
 

·
Registered
Joined
·
2,129 Posts
imported post

Just remember that when mounting the C Bailey Wind Screen that is thicker you MUST use washers under the screws to enable you to use the height adjustment feature of the Wing.

I had to do that with two bikes so far.

Just get some washers that are close in size and clamp them together in a long screw with nut. Now chuck the Screw with washers in your electric drill or drill press and you can use a file to turn down the diameter of washers to exactly what you need.

Good Luck

Mohawk
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top