Steve Saunders Goldwing Forums banner

wiring problem

512 Views 2 Replies 2 Participants Last post by  83rider
imported post

hello folks. i`m new to the site and of course have my share of problems with my wing. the latest and most difficult yet is the one i have now. i was riding noticed it wasn`t charging and i could hear the engine revs through my speakers, as soon as i slowed down the dang thing cut of and i lost all power to everything. battery is still good and i can spin motor by touching poles on starter relay but when i turn the key on nothing happens. i have digital display but it doesn`t come on at all. and i have no power going to plugs. i think it might be a ground problem sinse everything stopped working at once but i`m not 100% sure. any help would be GREATLY appreciated. thanks to all.
Status
Not open for further replies.
1 - 3 of 3 Posts
imported post

By the solenoid is a fuse called the dogbone fuse. This is the main power fuse for the whole bike. It can look good and still fail. It can be replaced with a modern fuse holder that is available at any auto parts store. I replaced mine with a 30 amp fuse and holder. Just loosen the screws on both ends of the dogbone and insert new wires. I hope your problem is this simple.

John
imported post

thanks dadoo it was that simple. i`m a happy winger again.
1 - 3 of 3 Posts
Status
Not open for further replies.
Top