imported post
Where could one find air fittings for shocks (1200 86 Aspy) so they could be filled
manually?
Vic
Where could one find air fittings for shocks (1200 86 Aspy) so they could be filled
manually?
Vic
Al Himer
- Status
imported post
on the progressives for the Gl1500, the air lines are Monroe air shock items. Might be the same for the GL1200
on the progressives for the Gl1500, the air lines are Monroe air shock items. Might be the same for the GL1200
imported post
If you have a on board air system there is no fittings that you can fill, man. you have to use the air system. I have a 86 Aspencade and went through the same ordeal, I had to take my system apart and get it working. Good luck getting it to work. MCFF
If you have a on board air system there is no fittings that you can fill, man. you have to use the air system. I have a 86 Aspencade and went through the same ordeal, I had to take my system apart and get it working. Good luck getting it to work. MCFF
imported post
Hi,
I am certainly not an expert on this system but as I recall the bike has to be in the accesory key position or some such for the pump to work. If it works out of the bike then the pump must be good. If you run 12 volts directly to it does it run in the bike. Possibly a bad ground? Just guessing and bumping you up.
Good luck,
Greg
Hi,
I am certainly not an expert on this system but as I recall the bike has to be in the accesory key position or some such for the pump to work. If it works out of the bike then the pump must be good. If you run 12 volts directly to it does it run in the bike. Possibly a bad ground? Just guessing and bumping you up.
Good luck,
Greg
- Status
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
