Anyone out there still doing this as a service. I know, I can do it myself.... but, to be honest that’s a job I am not really all that good with. Plus I hate working on those.
Thanks,
Rodd
Thanks,
Rodd
Rodd
84 GL1200 Carb cleaning/ rebuild.
There are a few. Looked on Randakk's site, but only found this.
www.randakksblog.com
You may be better off going to a GWRRA meeting and asking the locals.
Randakk's Approved Carb Rebuilder Program | Randakk's Blog
If you would prefer to have a "pro" rebuild your carbs, here's the answer. You can now have a professional rebuild your carbs via a Randakk's Approved Honda GL1000 / GL1100 / GL1200/ GL1500 / CBX/ CX500/ DOHC-4 Carb Rebuilder. You can trust your carbs to any of these folks as I have rigorously...
www.randakksblog.com
You may be better off going to a GWRRA meeting and asking the locals.
1200 carbs are the simplest of all the carbed goldwings. Take your time and check everything twice and save some money, unless you have more than you need.
thread I created: Where can I get my Carbs Overhauled?
Barret Bear Steck
Repair and Restoration of bikes
Carb overhauls
www.facebook.com
Madison, WI
6082149803
Barret Bear Steck
Repair and Restoration of bikes
Carb overhauls
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Madison, WI
6082149803
I sent mine to Pistol Pete's son Mark last year, and he did a great job.
He uses the same email as Pistol Pete:
petesgl@comcast.net
He uses the same email as Pistol Pete:
petesgl@comcast.net
this is a good guy to use also:
-----------------------------------
thread I created: Where can I get my Carbs Overhauled?
Barret Bear Steck
Repair and Restoration of bikes
Carb overhauls
www.facebook.com
Madison, WI
6082149803
,
Bear's Cycle & Restoration
N1639 Brunkow rd
Juda, WI 53550
608-214-9803
bearscycleshop@gmail.com
www.facebook.com
1975 - 2000
I do many Goldwing carbs, which allows me to charge less and provide the most consistent results. The prices below include all expected replacement parts and return shipping. Turnaround is generally 1-2 weeks.
GL1100 $500
GL1200 $400
GL1500 $350
I have spare carbs for hard parts if necessary. Additional services can include soda blasting, external polishing of caps, replacement of rubber CV diaphragms, and new Honda float valves.
-----------------------------------
thread I created: Where can I get my Carbs Overhauled?
Barret Bear Steck
Repair and Restoration of bikes
Carb overhauls
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Madison, WI
6082149803
,
Bear's Cycle & Restoration
N1639 Brunkow rd
Juda, WI 53550
608-214-9803
bearscycleshop@gmail.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
1975 - 2000
I do many Goldwing carbs, which allows me to charge less and provide the most consistent results. The prices below include all expected replacement parts and return shipping. Turnaround is generally 1-2 weeks.
- Complete disassembly, no shortcuts
- Ultrasonic cleaning
- Randakk's overhaul parts
- Replacement of felt shaft seals
- Polishing of slides, caps, and bores
- Proper mods for better performance
- Wet tested, bench-synched, and set to factory base settings, securely packaged and shipped
GL1100 $500
GL1200 $400
GL1500 $350
I have spare carbs for hard parts if necessary. Additional services can include soda blasting, external polishing of caps, replacement of rubber CV diaphragms, and new Honda float valves.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
